Hobart 6460C-6 Correctional Vegetable / Potato Peeler 50-60 lb./1-3 min. - 115v/60/1, 1 HP

Hobart  |  SKU: 23375

Contact us for details: 866 618 4999

Mon-Fri: 8:00 AM - 5:00 PM CST

Sat: 9:00 AM - 3:00 PM CST

Special Order

Financing

Financing info

Description

Hobart 6460C-6 Vegetable / Potato Peeler

 

  The Hobart 6460C-6 Vegetable/Potato Peeler ships correctional ready. It has a cylindrical construction, heliarc-welded stainless-steel with a removable NSF approved Lexan liner. The peeler and peel trap unit are glass-beaded stainless-steel. The plastic molded hopper cover is gray. The door, handle, discharge chute, and legs are cast aluminum and ball burnished for durability. At the bottom of the peeler unit is cushioned in a resilient rubber trim holding. The stainless-steel drive shaft has an advanced design for long life and performance.

 

  This peeler will increase productivity in your kitchen by eliminated the mundane task of peeling. Instead of peeling manually, this itme will allow for employees to be assigned to other tasks. In just 3 minutes, 50 to 60 pounds of potatoes, and most root vegetables, can be peeled. Peel waste is minimized and this will provide increased portions per load. It has a simplistic 5 minute timer that adjusts in increments from 1/2 to 5 minutes with 15 second markings on a large timer dial for consistent results.

 

  There is a rear mounted inlet with a 5-foot fill hose for cleanability and it meets plumbing codes. Water from the inlet will strike the curved surface of the hopper cover, promoting interior self-cleaning and preventing undesirable splash.

 

 

Common Questions & Answers

 

What are the electrical requirements?

You must be able to accommodate 115 volts, 60 hertz, and 1-phase with a cord and plug.

 

What are the dimensions?

It is 27-1/4" deep and has a height of 60-1/16".

 

If you have any questions or would like to purchase this item, please give us a call at Jean's Restaurant Supply. It is our pleasure to serve you, nothing will make us happier than helping you succeed.

 

Hobart 6460C-6 Vegetable / Potato Peeler

 

  The Hobart 6460C-6 Vegetable/Potato Peeler ships correctional ready. It has a cylindrical construction, heliarc-welded stainless-steel with a removable NSF approved Lexan liner. The peeler and peel trap unit are glass-beaded stainless-steel. The plastic molded hopper cover is gray. The door, handle, discharge chute, and legs are cast aluminum and ball burnished for durability. At the bottom of the peeler unit is cushioned in a resilient rubber trim holding. The stainless-steel drive shaft has an advanced design for long life and performance.

 

  This peeler will increase productivity in your kitchen by eliminated the mundane task of peeling. Instead of peeling manually, this itme will allow for employees to be assigned to other tasks. In just 3 minutes, 50 to 60 pounds of potatoes, and most root vegetables, can be peeled. Peel waste is minimized and this will provide increased portions per load. It has a simplistic 5 minute timer that adjusts in increments from 1/2 to 5 minutes with 15 second markings on a large timer dial for consistent results.

 

  There is a rear mounted inlet with a 5-foot fill hose for cleanability and it meets plumbing codes. Water from the inlet will strike the curved surface of the hopper cover, promoting interior self-cleaning and preventing undesirable splash.

 

 

Common Questions & Answers

 

What are the electrical requirements?

You must be able to accommodate 115 volts, 60 hertz, and 1-phase with a cord and plug.

 

What are the dimensions?

It is 27-1/4" deep and has a height of 60-1/16".

 

If you have any questions or would like to purchase this item, please give us a call at Jean's Restaurant Supply. It is our pleasure to serve you, nothing will make us happier than helping you succeed.

 

Specifications

Sold By
1/Each
Manufacturer
Hobart
Model Number
6460C-6
Depth
27-1/4"
Height
30-1/16" (38-3/8" with water inlet)
Diameter - Max
21"
Capacity
50-60 lb. Potatoes in 1-3 minutes
Style
Correctional

Resources

Video

Description

Hobart 6460C-6 Vegetable / Potato Peeler

 

  The Hobart 6460C-6 Vegetable/Potato Peeler ships correctional ready. It has a cylindrical construction, heliarc-welded stainless-steel with a removable NSF approved Lexan liner. The peeler and peel trap unit are glass-beaded stainless-steel. The plastic molded hopper cover is gray. The door, handle, discharge chute, and legs are cast aluminum and ball burnished for durability. At the bottom of the peeler unit is cushioned in a resilient rubber trim holding. The stainless-steel drive shaft has an advanced design for long life and performance.

 

  This peeler will increase productivity in your kitchen by eliminated the mundane task of peeling. Instead of peeling manually, this itme will allow for employees to be assigned to other tasks. In just 3 minutes, 50 to 60 pounds of potatoes, and most root vegetables, can be peeled. Peel waste is minimized and this will provide increased portions per load. It has a simplistic 5 minute timer that adjusts in increments from 1/2 to 5 minutes with 15 second markings on a large timer dial for consistent results.

 

  There is a rear mounted inlet with a 5-foot fill hose for cleanability and it meets plumbing codes. Water from the inlet will strike the curved surface of the hopper cover, promoting interior self-cleaning and preventing undesirable splash.

 

 

Common Questions & Answers

 

What are the electrical requirements?

You must be able to accommodate 115 volts, 60 hertz, and 1-phase with a cord and plug.

 

What are the dimensions?

It is 27-1/4" deep and has a height of 60-1/16".

 

If you have any questions or would like to purchase this item, please give us a call at Jean's Restaurant Supply. It is our pleasure to serve you, nothing will make us happier than helping you succeed.

 

Hobart 6460C-6 Vegetable / Potato Peeler

 

  The Hobart 6460C-6 Vegetable/Potato Peeler ships correctional ready. It has a cylindrical construction, heliarc-welded stainless-steel with a removable NSF approved Lexan liner. The peeler and peel trap unit are glass-beaded stainless-steel. The plastic molded hopper cover is gray. The door, handle, discharge chute, and legs are cast aluminum and ball burnished for durability. At the bottom of the peeler unit is cushioned in a resilient rubber trim holding. The stainless-steel drive shaft has an advanced design for long life and performance.

 

  This peeler will increase productivity in your kitchen by eliminated the mundane task of peeling. Instead of peeling manually, this itme will allow for employees to be assigned to other tasks. In just 3 minutes, 50 to 60 pounds of potatoes, and most root vegetables, can be peeled. Peel waste is minimized and this will provide increased portions per load. It has a simplistic 5 minute timer that adjusts in increments from 1/2 to 5 minutes with 15 second markings on a large timer dial for consistent results.

 

  There is a rear mounted inlet with a 5-foot fill hose for cleanability and it meets plumbing codes. Water from the inlet will strike the curved surface of the hopper cover, promoting interior self-cleaning and preventing undesirable splash.

 

 

Common Questions & Answers

 

What are the electrical requirements?

You must be able to accommodate 115 volts, 60 hertz, and 1-phase with a cord and plug.

 

What are the dimensions?

It is 27-1/4" deep and has a height of 60-1/16".

 

If you have any questions or would like to purchase this item, please give us a call at Jean's Restaurant Supply. It is our pleasure to serve you, nothing will make us happier than helping you succeed.

 

Specifications
Sold By
1/Each
Manufacturer
Hobart
Model Number
6460C-6
Depth
27-1/4"
Height
30-1/16" (38-3/8" with water inlet)
Diameter - Max
21"
Capacity
50-60 lb. Potatoes in 1-3 minutes
Style
Correctional
Type
Potato / Vegetable Peeler
Features
Lockable controls & tamper resistant fasteners

Equip Your Restaurant for Success!

Discover high-quality equipment tailored to your needs.