Need Help Designing Your Commercial Kitchen Layout? Email us: bids@jeansrs.com

Hobart 6460C-6 Correctional Vegetable / Potato Peeler 50-60 lb./1-3 min. - 115v/60/1, 1 HP

Hobart  |  SKU: 23375
$14,643.09
/ea
Corpus Christi Store: 0 in stock
McAllen Store: 0 in stock
View your Reorder Pad list

Description

Hobart 6460C-6 Vegetable / Potato Peeler

 

  The Hobart 6460C-6 Vegetable/Potato Peeler ships correctional ready. It has a cylindrical construction, heliarc-welded stainless-steel with a removable NSF approved Lexan liner. The peeler and peel trap unit are glass-beaded stainless-steel. The plastic molded hopper cover is gray. The door, handle, discharge chute, and legs are cast aluminum and ball burnished for durability. At the bottom of the peeler unit is cushioned in a resilient rubber trim holding. The stainless-steel drive shaft has an advanced design for long life and performance.

 

  This peeler will increase productivity in your kitchen by eliminated the mundane task of peeling. Instead of peeling manually, this itme will allow for employees to be assigned to other tasks. In just 3 minutes, 50 to 60 pounds of potatoes, and most root vegetables, can be peeled. Peel waste is minimized and this will provide increased portions per load. It has a simplistic 5 minute timer that adjusts in increments from 1/2 to 5 minutes with 15 second markings on a large timer dial for consistent results.

 

  There is a rear mounted inlet with a 5-foot fill hose for cleanability and it meets plumbing codes. Water from the inlet will strike the curved surface of the hopper cover, promoting interior self-cleaning and preventing undesirable splash.

 

 

Common Questions & Answers

 

What are the electrical requirements?

You must be able to accommodate 115 volts, 60 hertz, and 1-phase with a cord and plug.

 

What are the dimensions?

It is 27-1/4" deep and has a height of 60-1/16".

 

If you have any questions or would like to purchase this item, please give us a call at Jean's Restaurant Supply. It is our pleasure to serve you, nothing will make us happier than helping you succeed.

 

Hobart 6460C-6 Vegetable / Potato Peeler

 

  The Hobart 6460C-6 Vegetable/Potato Peeler ships correctional ready. It has a cylindrical construction, heliarc-welded stainless-steel with a removable NSF approved Lexan liner. The peeler and peel trap unit are glass-beaded stainless-steel. The plastic molded hopper cover is gray. The door, handle, discharge chute, and legs are cast aluminum and ball burnished for durability. At the bottom of the peeler unit is cushioned in a resilient rubber trim holding. The stainless-steel drive shaft has an advanced design for long life and performance.

 

  This peeler will increase productivity in your kitchen by eliminated the mundane task of peeling. Instead of peeling manually, this itme will allow for employees to be assigned to other tasks. In just 3 minutes, 50 to 60 pounds of potatoes, and most root vegetables, can be peeled. Peel waste is minimized and this will provide increased portions per load. It has a simplistic 5 minute timer that adjusts in increments from 1/2 to 5 minutes with 15 second markings on a large timer dial for consistent results.

 

  There is a rear mounted inlet with a 5-foot fill hose for cleanability and it meets plumbing codes. Water from the inlet will strike the curved surface of the hopper cover, promoting interior self-cleaning and preventing undesirable splash.

 

 

Common Questions & Answers

 

What are the electrical requirements?

You must be able to accommodate 115 volts, 60 hertz, and 1-phase with a cord and plug.

 

What are the dimensions?

It is 27-1/4" deep and has a height of 60-1/16".

 

If you have any questions or would like to purchase this item, please give us a call at Jean's Restaurant Supply. It is our pleasure to serve you, nothing will make us happier than helping you succeed.

 

Specifications
Capacity
50-60 lb. Potatoes in 1-3 minutes
Control Type
Manual Tumbler
Cord Length
5-1/2 ft.
Depth
27-1/4"
Diameter - Max
21"
Exterior Finish
Peeler and peel trap unit are glass-beaded stainless steel. Plastic molded hopper cover. Door and handle, discharge chute, and legs are cast aluminum and ball burnished. Bottom of peeler unit is cushioned in resilient rubber trim molding.
Features
Lockable controls & tamper resistant fasteners
Height
30-1/16" (38-3/8" with water inlet)
Horsepower
1 HP
USA Made
Yes
Manufacturer
Hobart
Material
Stainless Steel, Aluminum and Silicon
Model Number
6460C-6
NSF Listed
Yes
Power Type
Electric
Sold By
1/Each
Style
Correctional
Type
Potato / Vegetable Peeler
Volt/Hz/Ph
115v/60/1
Warranty
1-Year parts, labor & travel time during normal working hours within the USA.
Warranty Disclaimer
RESIDENTIAL USERS: Warranty does not apply to non-commercial or residential applications. We reserve the right to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Specifications

Capacity
50-60 lb. Potatoes in 1-3 minutes
Control Type
Manual Tumbler
Cord Length
5-1/2 ft.
Depth
27-1/4"
Diameter - Max
21"
Exterior Finish
Peeler and peel trap unit are glass-beaded stainless steel. Plastic molded hopper cover. Door and handle, discharge chute, and legs are cast aluminum and ball burnished. Bottom of peeler unit is cushioned in resilient rubber trim molding.
Features
Lockable controls & tamper resistant fasteners
Height
30-1/16" (38-3/8" with water inlet)
Horsepower
1 HP
USA Made
Yes
Manufacturer
Hobart
Material
Stainless Steel, Aluminum and Silicon
Model Number
6460C-6
NSF Listed
Yes
Power Type
Electric
Sold By
1/Each
Style
Correctional
Type
Potato / Vegetable Peeler
Volt/Hz/Ph
115v/60/1
Warranty
1-Year parts, labor & travel time during normal working hours within the USA.
Warranty Disclaimer
RESIDENTIAL USERS: Warranty does not apply to non-commercial or residential applications. We reserve the right to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Resources

View details

Video

Description

Hobart 6460C-6 Vegetable / Potato Peeler

 

  The Hobart 6460C-6 Vegetable/Potato Peeler ships correctional ready. It has a cylindrical construction, heliarc-welded stainless-steel with a removable NSF approved Lexan liner. The peeler and peel trap unit are glass-beaded stainless-steel. The plastic molded hopper cover is gray. The door, handle, discharge chute, and legs are cast aluminum and ball burnished for durability. At the bottom of the peeler unit is cushioned in a resilient rubber trim holding. The stainless-steel drive shaft has an advanced design for long life and performance.

 

  This peeler will increase productivity in your kitchen by eliminated the mundane task of peeling. Instead of peeling manually, this itme will allow for employees to be assigned to other tasks. In just 3 minutes, 50 to 60 pounds of potatoes, and most root vegetables, can be peeled. Peel waste is minimized and this will provide increased portions per load. It has a simplistic 5 minute timer that adjusts in increments from 1/2 to 5 minutes with 15 second markings on a large timer dial for consistent results.

 

  There is a rear mounted inlet with a 5-foot fill hose for cleanability and it meets plumbing codes. Water from the inlet will strike the curved surface of the hopper cover, promoting interior self-cleaning and preventing undesirable splash.

 

 

Common Questions & Answers

 

What are the electrical requirements?

You must be able to accommodate 115 volts, 60 hertz, and 1-phase with a cord and plug.

 

What are the dimensions?

It is 27-1/4" deep and has a height of 60-1/16".

 

If you have any questions or would like to purchase this item, please give us a call at Jean's Restaurant Supply. It is our pleasure to serve you, nothing will make us happier than helping you succeed.

 

Specifications
Capacity
50-60 lb. Potatoes in 1-3 minutes
Control Type
Manual Tumbler
Cord Length
5-1/2 ft.
Depth
27-1/4"
Diameter - Max
21"
Exterior Finish
Peeler and peel trap unit are glass-beaded stainless steel. Plastic molded hopper cover. Door and handle, discharge chute, and legs are cast aluminum and ball burnished. Bottom of peeler unit is cushioned in resilient rubber trim molding.
Features
Lockable controls & tamper resistant fasteners
Height
30-1/16" (38-3/8" with water inlet)
Horsepower
1 HP
USA Made
Yes
Manufacturer
Hobart
Material
Stainless Steel, Aluminum and Silicon
Model Number
6460C-6
NSF Listed
Yes
Power Type
Electric
Sold By
1/Each
Style
Correctional
Type
Potato / Vegetable Peeler
Volt/Hz/Ph
115v/60/1
Warranty
1-Year parts, labor & travel time during normal working hours within the USA.
Warranty Disclaimer
RESIDENTIAL USERS: Warranty does not apply to non-commercial or residential applications. We reserve the right to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Have a question About this Item? let us know and we'll get back to you