Cambro UPR1826FA20580 25 1/2"W 20 Sheet Pan Rack w/ 3" Bottom Load Slides

To smoothly transport sheet pans from food prep areas to walk-in coolers, the Cambro UPR1826FA20580 Camshelving® Ultimate sheet pan rack's 32³⁄₅₀-inch-wide by 25¹⁄₂-inch-deep by 71¹⁹⁄₅₀-inch-tall structure is fitted with 5-inch non-marking metal swivel casters. Two of these casters are built with brakes to secure the unit in place, while all four are built with center stems that enhance stability when this unit is guided over uneven surfaces. This composite plastic unit resists rusting and corroding and is built with 20 pan rails that accommodate 20 full-size sheet pans or 40 half-size sheet pans. These rails are spaced 3 inches apart to simplify pan loading and removal, and their heat-resistant structures are capable of holding pans retrieved from a 350-degree-Fahrenheit oven. To keep the pans centered, these bottom-load, molded-in rails feature positioning ribs on their ends. The top frame's molded-in supports accommodate an 18-inch by 26-inch sheet pan to protect contents stored on the lower racks.

Product Details

• • Part of the Camshelving Ultimate series
  • Individual rail capacity: 55 lb.
  • Maximum unit capacity: 350 lb.
  • Can hold (20) 18-in. x 26-in. sheet pans or (40) 13-in. x 18-in. sheet pans
  • 20 molded-in rails made of rust- and corrosion-resistant composite plastic
  • Rails spaced 3 in. apart.
  • Rail ends built with positioning ribs that center pans
  • Rails can accommodate pans retrieved from a 350-degree-F oven
  • Top frame built with molded-in supports to accommodate an 18-in. x 26-in. sheet pan
  • Brushed graphite gray body
  • (4) 5-in. non-marking metal casters (2 with brakes, 2 without brakes) (not for use in freezers)
  • Withstands temperatures from -36 to 190 degrees F
  • Not for use in roll-in ovens
  • Ships knocked down
  • Each part can be removed and replaced
  • Overall dimensions: 33.06 in. W x 25.5 in. D x 71.63 in. H