Frymaster GF40 LP Propane Standard Floor Fryer with Millivolt Controls and Temperature Probe - Holds 50 lbs. - 122,000 BTU

Liquid Propane Floor Model Standard Gas Fryer

   Fryers are one of the best investments any food service business can make. You don't only have to use them to make the typical fries, chicken, or fish. Anything is possible with a little creativity. Your customers will not only love the typical foods that are normally fried, but also everything from pickles, macaroni and cheese, and even ice cream. Don't know what kind of fryer will best suit your needs? Then give us a call, our sales staff will fit you with the ideal fryer for your needs.

   One popular option is the GF40 model from Frymaster, it's an all-purpose fryer that runs on liquid propane and was designed with your needs in mind. It uses millivolt temperature controls and there are no electrical connections that are required. It stands on four 6" steel legs with 1" adjustments and casters. The frypot, door, and cabinet are constructed with stainless-steel. A set pf twin, wire mesh fry baskets with green coated handles are included and ca be stored on basket hangers when not in use.

   This unit has an open pot design, and when compared to tube style fryers, it is much easier to clean and probably more appropriate for if you work under serious time constraints. This design works especially well if you're predominantly frying foods like, French fries or foods that come frozen. It uses an exclusive Master Jet burner system creates a large heat-transfer area for reliable and even heat distribution. This also includes a durable temperature probe that senses changes in temperature and reacts by activating the burner response.

   At the bottom is a large cold zone with a slopping bottom that will collect and remove sediment from the frypot. This preserves the oil quality. However, when it's time to change out that oil and clean the fryer, a 1-1/4" IPS ball-type drain valve will easily help you drain out everything. The cold zone, as well as every inch of the frypot and heat transfer area can be cleaned and wiped down by hand.

Common Questions & Answers

What are the dimensions?
It has a capacity of 50 pounds. It has a height of 46-1/8", a depth of 30-7/8", and is 15-5/8" wide.

What are the required clearance measurements?
A minimum of 24" must be provided for the front, and 6" between the sides and rear of the fryer to any combustible material. A minimum of 18" must be maintained between the flue outlet and the lower edge of the exhaust hood filters. All of these clearances must be maintained in order for the unit to operate properly.

Jean's Restaurant Supply is the best place for you to buy a fryer. Don't hesitate to call us if you have any questions, it is our pleasure to serve you. Nothing will make us happier than helping your food service business grow more successful.